IMPACT SHPK

Technical Support

The post How to Find HIKVISION Device Firmware Version appeared first on IMPACT SHPK.

The camera must be added directly to the NVR’s POE port in order for Plug-and-Play mode to be used.

What you need:

• 1- POE cameras
• 2- POE NVR
• 3- POE switch

How to manually add POE cameras to an NVR:

Steps:

• Attach your camera to the switch’s POE port. Your NVR should be connected to the same switch.
• 2- Select Camera Management > Camera > IP Camera.

• Click Manual, enter the IP camera address, Username, and Administrator password, and then press OK.

Note

• If you choose Manual mode to add the IPC with the POE feature, the IPC password can differ from the NVR password.
• Unless the camera passwords match the NVR password or are the default value of 12345, do not hit One-touch Adding.

How to use Plug-and-Play mode to add IPC with POE feature to NVR:

Steps:

• Your camera should be connected to the NVR’s POE port. Let’s say you attach your camera to POE port 2.
• Select the second channel (D2) by going to Camera Management -> Camera -> IP Camera and clicking Edit.

• Select Adding Method as Plug-and-Play, and click OK.

Note:

Verify that your IPC camera’s password matches the one on your NVR.

Avoid clicking One-touch Adding.

IMPACT SHPK

Technical Support

The post How to add IPC to NVR with POE Functionality appeared first on IMPACT SHPK.